DTC P2510: ECM / Pcm Power Relay Sense Circuit Range/Performance
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2013 Lincoln Navigator, 2013 Lincoln MKZ, 2013 Lincoln MKX, 2013 Lincoln MKT, and 2013 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
DTC P2510: ECM / PCM POWER RELAY SENSE CIRCUIT RANGE/PERFORMANCE
| Description: | The ISP-R and the INJPWRM circuits are monitored for correlation. This DTC sets when the voltage on the ISP-R and the INJPWRM circuit voltages do not correspond for a calibrated period of time. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The INJPWRM PID voltage reading should be 0 volts when the ignition is in the OFF, ACC or LOCK position. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST B . | ||