DTC P2128: Throttle/Pedal Position Sensor/Switch E Circuit High
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2013 Lincoln Navigator, 2013 Lincoln MKZ, 2013 Lincoln MKX, 2013 Lincoln MKT, and 2013 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
DTC P2128: THROTTLE/PEDAL POSITION SENSOR/SWITCH E CIRCUIT HIGH
| Description: | This DTC sets when the accelerator pedal position 2 (APP2) is out of self-test range high. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An APP2 or APP_E sensor PID reading may indicate a concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DK . | ||