DTC P1011: WASTEGATE Control Pressure Sensor Circuit Range/Performance
WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 2013 Lincoln Navigator, 2013 Lincoln MKZ, 2013 Lincoln MKX, 2013 Lincoln MKT, and 2013 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
DTC P1011: WASTEGATE CONTROL PRESSURE SENSOR CIRCUIT RANGE/PERFORMANCE
| Description: | This DTC sets when the wastegate vacuum sensor reading has exceeded the atmospheric pressure by greater than a calibrated threshold and the fault timer has exceeded the calibrated time threshold. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The typical maximum threshold is 10.16 kPa (1.47 psi) and time threshold is 5 seconds. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HN . | ||