LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Engine Controls (Except Diesel & Hybrid) - DTC P0001 - P0209) >> DTC P0108: Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High

DTC P0108: Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2013 Lincoln Navigator, 2013 Lincoln MKZ, 2013 Lincoln MKX, 2013 Lincoln MKT, and 2013 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0108: MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR HIGH

Description:  This DTC sets when the manifold absolute pressure (MAP) sensor operating voltage is greater than the maximum allowable calibrated parameter of 4.96 volts.
Possible Causes: 
  • VREF circuit short to voltage
  • MAP circuit open
  • MAP circuit short to voltage
Diagnostic Aids:   
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
Explorer 3.5L GTDI, F-150 3.5L, Flex 3.5L GTDI, MKS 3.5L, MKT 3.5L, Taurus 3.5L GTDI GO to PINPOINT TEST DN .
All others GO to PINPOINT TEST DM .