DTC P0098: Intake Air Temperature Sensor 2 Circuit High
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2013 Lincoln Navigator, 2013 Lincoln MKZ, 2013 Lincoln MKX, 2013 Lincoln MKT, and 2013 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0098: INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT HIGH
| Description: | This DTC sets when the intake air temperature 2 (IAT2) sensor signal is greater than the self-test maximum. The IAT2 sensor maximum is 4.6 volts. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the IAT2 PID value. A typical IAT2 temperature should be greater than the IAT1 temperature. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Explorer 3.5L GTDI, F-150 3.5L, Flex 3.5L GTDI, MKS 3.5L, MKT 3.5L, Taurus 3.5L GTDI | GO to PINPOINT TEST DN . | ||
| All others | GO to PINPOINT TEST DU . | ||