To Disengage an Inoperable Stow Motor

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Make sure the wire harness is not damaged while positioning the release lever or the power-fold seat will not operate.

NOTE: LH seat shown in illustration, RH similar.

Pry to release the clips and remove the backrest latch outer cover.

Fig 1: Locating Backrest Latch Outer Cover
Courtesy of FORD MOTOR CO.
Position the pivot release lever down and pivot the seat away from the floor striker.

Fig 2: Locating Pivot Release Lever

Courtesy of FORD MOTOR CO.