Connecting Rod to Crankshaft Side Clearance
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S)
|
|
Feeler Gauge Set
303-D027 (D81L-4201-A) or equivalent |
NOTE:
Refer to the appropriate Engine Mechanical article for the specification.
- Using the Feeler Gauge Set, measure the clearance between the connecting rod and the crankshaft. Verify the measurement is within specification.
Courtesy of FORD MOTOR CO.