LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (Safety Belt System) >> Removal And Installation >> Safety Belt Buckle - Front >> Removal

Safety Belt Buckle - Front: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Before beginning any service procedure, refer to SAFETY WARNINGS . Failure to follow this instruction may result in serious personal injury.
WARNING: All safety belt components must be inspected and corrected as part of any collision repair. Inspect all safety belt components as prescribed by Safety Belt Inspection and Repair After a Collision, refer to Safety Belt Inspection and Repair After a Collision  . Failure to follow this instruction may result in incorrect operation of the safety belt system and increase the risk of serious personal injury or death in a crash.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the front seat. REFER to ACCESSING MOUNTING BOLTS ON AN INOPERATIVE POWER SEAT .
    1. -
    2. -
    3. -
      • 40 Nm (30 lb-ft)
    4. -
      G09091566