Symptom Chart: Parking Aid - Video
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this service information assumes a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to
DIAGNOSTIC METHODS
for information about these practices.
SYMPTOM DESCRIPTION - PARKING AID - VIDEO
| Condition |
Possible Sources |
Actions |
- The rear video is inoperative Fuse
|
- Wiring, terminals or connectors
- Video camera
- APIM
- BCM
|
|
- The FDIM
displays PLEASE CHECK SURROUNDINGS FOR SAFETY and a black screen/no image or displays an error message
|
- Fuse
- Wiring, terminals or connectors
- Video camera
- APIM
- BCM
|
|
- Static/flashing/blinking/flickering/scrolling or rolling image/screen/scrolling horizontal lines
|
- Wiring, terminals or connectors
- Video camera
|
|
- Poor image quality (foggy/cloudy/fuzzy/blurry/hazy image or moisture/water in lens or black spots)
|
- Wiring, terminals or connectors
- Video camera
|
|
- Manual zoom function is inoperative
|
- Manual zoom feature is disabled
- Video camera
|
- CARRY OUT the video camera configuration using the scan tool under Body > RVC Configuration.
- GO to PINPOINT TEST I .
|
- The visual park aid alert is inoperative
|
- Wiring, terminals or connectors
- Video camera
- BCM
- PAM
|
- CARRY OUT the video camera configuration using the scan tool under Body > RVC Configuration.
- GO to PINPOINT TEST L .
|
- Fixed guidelines are not displayed on the video image
|
- Fixed guidelines feature is disabled
- Video camera
|
- CARRY OUT the video camera configuration using the scan tool under Body > RVC Configuration.
- GO to PINPOINT TEST M .
|
- Active guidelines are not displayed on the video image
|
- Video camera not configured after replacement
|
- CARRY OUT the video camera configuration using the scan tool under Body > RVC Configuration.
|
- Active guidelines feature is disabled
- Steering wheel position data error
- Video camera
|
|
- Video camera delay feature is inoperative
|
- Video camera delay feature is disabled
|
- ENABLE the video camera delay feature within the FDIM
.
|
|
|
|
|