Image Display - Police Package
The liftgate must remain closed for correct operation of the video camera system.
The video camera system has 2 video features:
- Fixed guidelines - assists the driver with backing into a parking space or aligning the vehicle with an object.
- Video camera delay - allows the driver to see the image behind the vehicle after the vehicle is shifted out of REVERSE. The image will not be displayed if the vehicle is shifted into PARK.
The video camera delay feature is controlled within the rear view mirror. The video camera delay feature keeps the image displayed on the rear view mirror until the vehicle reaches 8 kmh (5 mph), when the vehicle is shifted out of REVERSE. The video camera fixed guidelines feature displays guidelines on top of the video image to assist the driver with alignment of the vehicle. The guidelines are only available when the transmission is in REVERSE. Three color-coded lines (red, yellow, green) identify different zones between the rear of the vehicle and objects.
The color-coded lines cannot indicate accurate or consistent distances between objects located behind the vehicle and at the rear of the vehicle. This normal condition is due to variances in vehicle ride height, including, but not limited to, vehicle loading.
The BCM and the video camera communicate on a LIN , which is a dedicated single wire communication network.
The messages sent from the BCM to the video camera are:
- Transmission selector (PRNDL) status
- Liftgate ajar status
- Camera configuration data
The messages sent from the video camera to the BCM are:
- Camera status
- Camera part number data
- Fixed guideline status