Network Message Chart
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
BCM NETWORK MESSAGE CHART
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Passive entry control data | RFA module | Provide the BCM with the Intelligent Access (IA) key data. The data contains information such as if an Intelligent Access (IA) key has been detected, how many were detected, and if it is a programmed key. |
| Passive entry_control code | RFA module | Provide the BCM with RKE commands such as lock or unlock. |
| Passive entry_fob number | RFA module | Provide the BCM with which specific programmed Intelligent Access (IA) key was used. |
| Passive entry_lock request | RFA module | Used in conjunction with the Passive entry_lock status message. Provides the BCM with the input (keyless entry keypad, RKE transmitter, etc.) that created the lock or unlock request. |
| Passive entry_lock status | RFA module | Provides the BCM with the status of the last lock or unlock command. |
IPC NETWORK MESSAGE CHART
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Perimeter alarm chime request | BCM | Used by the IPC to sound the perimeter alarm chime and display TO STOP ALARM START VEHICLE in the message center. |