Coolant Inlet Pipe - 3.5L Ti-VCT, 3.7L Ti-VCT: Installation
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate the coolant outlet pipe O-ring seals with clean engine coolant and install the O-ring seals on the coolant outlet pipe.
- Install the coolant outlet pipe and attach the thermostat housing.
- Connect the degas bottle-to-coolant outlet pipe hose.
- For 3.5L Twin Independent Variable Cam Timing (Ti-VCT) engine, install the lower intake manifold. REFER to LOWER INTAKE MANIFOLD .
- For 3.7L Twin Independent Variable Cam Timing (Ti-VCT) engine, install the lower intake manifold. REFER to LOWER INTAKE MANIFOLD .