LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 289 (Engine Cooling System) >> Removal And Installation >> Block Heater - 2.0L GTDI >> Removal

Block Heater - 2.0L GTDI: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Before beginning any service procedure, refer to SAFETY WARNINGS . Failure to follow this instruction may result in serious personal injury.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
  2. NOTE: To install, route the block heater power cable away from hot or rotating components, or the cable can be damaged.
    G08030213
  3. G08030214
scientia non olet · About LEMON Manuals