Active Park Assist Message Display
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
The IPC message center displays the active park assist message.
The following conditions can result in the active park assist system to be cancelled:
ACTIVE PARK ASSIST MESSAGE DISPLAY
| Item | Description |
|---|---|
| Grabbing the steering wheel while the active park assist system is controlling the steering. | "Active Park Assist cancelled by driver input" followed by a chime |
| Exceeding vehicle speed above 29 kmh (18 mph) during the measuring phase for 30 consecutive seconds. | "Reduce Speed" |
| Exceeding vehicle speed above 9.7 kmh (6 mph) when the system is controlling the steering. | "Active Park Assist cancelled by high speed" followed by a chime |
| Deactivation of the AdvanceTrac® System by the operator, an ABS or AdvanceTrac® event has occurred while the system has control of the steering. | "Active Park Assist cancelled by AdvanceTrac" or "Active Park Assist cancelled by Anti-lock Brake System event" followed by a chime |
| If any vehicle door (except the drivers door) or liftgate is opened when the system is controlling the steering, if the operator engages DRIVE (D) before the vehicle is far enough inside the parking space, or the system cannot follow the desired steering path. | "Active Park Assist Deactivated" followed by a chime |
| A vehicle attachment is detected, such as a trailer or bike rack, by the reverse parking aid system. | "Active Park Assist is not available" followed by a chime |
| Any door (except the driver door) is ajar. | "Active Park Assist is not available" followed by a chime |