Pinpoint Test N: U0300:55
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- N1 INSPECT THE C-CM BRACKET
- Inspect for damage to the C-CM bracket.
Is the C-CM bracket damaged?
- Yes : REPAIR or REPLACE the C-CM bracket as necessary. Refer to CRUISE-CONTROL MODULE (C-CM) . CARRY OUT the C-CM alignment. Refer to CRUISE CONTROL MODULE (C-CM) (WITH SENSOR) ADJUSTMENT .
- No : GO to N2 .
- N2 CARRY OUT THE VERTICAL AND HORIZONTAL ALIGNMENT
- Carry out the C-CM alignment. Refer to CRUISE CONTROL MODULE (C-CM) (WITH SENSOR) ADJUSTMENT .
Does the C-CM align correctly?
- Yes : The system is operating correctly at this time. The concern was caused by a misaligned sensor.
- No : INSTALL a new C-CM . Refer to CRUISE-CONTROL MODULE (C-CM) .