LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (Four Wheel Drive (4WD) Systems) >> Removal And Installation >> All Terrain Control Module (ATCM) >> Installation

All Terrain Control Module (ATCM): Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the ATCM  into the upper finish panel and connect the electrical connector.
  2. Press the upper finish panel downward, securing the rear retaining clips. Install the upper finish panel screw and tighten.
  3. Connect the arm rest latch trim panel to the upper finish panel.
scientia non olet · About LEMON Manuals