LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (Four Wheel Drive (4WD) Systems) >> Diagnosis And Testing >> Four Wheel Drive (4WD) Systems >> Principles of Operation >> AWD Drive Cycle

AWD Drive Cycle

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Carry out the AWD DRIVE CYCLE  after downloading the ATC  solenoid bar code information to the PCM.

NOTE: Always drive the vehicle in a safe manner according to driving conditions and obey all traffic laws.
  1. Carry out 3 accelerations from 0-48 km/h (0-30 mph) in a straight line.
    • Perform this procedure at low, medium and full accelerator pedal position.
    • Verify that there is no perceived front wheel slip.
  2. On dry pavement, drive the vehicle at 8 km/h (5 mph) in a fully locked turn.
    • Verify that there is no driveline binding.
scientia non olet · About LEMON Manuals