LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 273 (Handles, Locks, Latches And Entry Systems - With Intelligent Access) >> General Procedures >> Remote Memory Deactivation

Remote Memory Deactivation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press and hold either memory button (1 or 2) for 5 seconds. A tone sounds after 1-1/2 seconds when the memory store is done. Continue to hold until a second tone sounds after 5 seconds.
  2. Within 3 seconds, press the UNLOCK button on the Remote Keyless Entry (RKE) transmitter.
  3. If a second memory setting is to be deactivated, repeat the procedure with the second RKE  transmitter.