LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (Seat System - Seats-Seating - 1ST Row) >> Removal And Installation >> Driver Seat Module (DSM) >> Installation

Driver Seat Module (DSM): Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the DSM  electrical connectors.
  2. Position the DSM  and install the 2 screws.
  3. NOTE: This step is necessary only if the DSM  is being replaced.

    PMI  is required when installing a new DSM  . Refer to the scan tool instructions to carry out PMI  .

scientia non olet · About LEMON Manuals