Transmission Fluid Pan: Removal
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING .
- Remove the transmission fluid pan drain plug and allow the transmission fluid to drain.
- Install the transmission fluid pan drain plug.
- Tighten to 18 Nm (159 lb-in).
-
NOTE: The transmission fluid pan gasket is a reusable gasket. Do not discard the transmission fluid pan gasket.
Remove and 19 bolts and remove the transmission fluid pan and gasket.