LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Automatic Transmission - 6R140 (TORQSHIFT-R-6)) >> Removal & Installation >> Transmission Filler Tube - Gasoline Engines >> Removal

Transmission Filler Tube - Gasoline Engines: Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING .
  2. Remove the transmission fluid level indicator.
    Fig 1: Locating Transmission Fluid Level Indicator
    G07482900Courtesy of FORD MOTOR CO.
  3. Remove the upper transmission fluid filler tube bolt.
    Fig 2: Locating Upper Transmission Fluid Filler Tube Bolt
    G07482901Courtesy of FORD MOTOR CO.
  4. Remove the lower transmission fluid filler tube bolt, remove the transmission fluid filler tube and discard the O-ring seal.
    Fig 3: Locating Transmission Fluid Filler Tube Mounting Bolt
    G07482896Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals