Charger Connected to Battery Posts
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Use the combination battery charger and battery tester/analyzer GR 1 190 V3.0 Intelligent Diagnostic Charger or equivalent to charge the battery.
NOTE:
The Battery Monitoring Sensor (BMS) relearns the battery's state of charge within 4-6 hours after the sensor is removed from the battery. For additional BMS information, refer to
CHARGING SYSTEM
.
- Connect the positive (red) charger clamp to the positive battery post.
- Connect the negative (black) charger clamp to the negative battery post.
- Charge the battery according to the battery charger owner's literature.