LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Automatic Transmission - 5R110W (TORQSHIFT-R)) >> In-Vehicle Repair >> Transmission Filler Tube >> Installation

Transmission Filler Tube: Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new transmission fluid filler tube O-ring.
    Fig 1: Locating Transmission Fluid Filler Tube O-Ring
    G06140618Courtesy of FORD MOTOR CO.
  2. NOTE: Coat the O-ring at the bottom of the transmission fluid filler tube with transmission fluid.

    Position the transmission fluid level indicator tube and install the bolt.

    • Tighten to 10 Nm (89 lb-in).
      Fig 2: Locating Transmission Fluid Level Indicator Tube Bolt
      G06773623Courtesy of FORD MOTOR CO.
  3. Install the transmission fluid level indicator.
    Fig 3: Locating Transmission Fluid Level Indicator
    G06140622Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals