Range Selection: Tow/Haul

The tow/haul feature was designed to assist the vehicle when towing a trailer or a heavy load. All transmission gear ranges, including all 5 forward gears, are available when using the tow/haul feature.

The tow/haul function is activated and deactivated through a switch located on the end of the selector lever. The indicator light that is located in the Instrument Cluster (IC) will illuminate when the tow/haul is activated and will go off when deactivated.

With the tow/haul activated, the transmission will have the following features:

• Shifts will occur at higher vehicle speeds for a given Accelerator Pedal Position (APP) to improve vehicle acceleration, reduce excessive shifting and increase the coast braking capability.
• The torque converter will lock up at lower vehicle speeds than normal with a given APP to improve transmission cooling and efficiency.
• Upshifts are temporarily delayed while decreasing APP during hill cresting to reduce excessive transmission shifting and to prepare for a possible grade braking downshift event.
• Engine braking is provided in all forward gears without the requirement of moving the selector lever.
• Manual 1, 2 or 3 will still be available.
• Grade braking downshift feature provides increased coast braking automatically to assist driver in maintaining desired speed while descending a grade. This reduces duty cycle on the brake system and increases brake pad longevity.
• Grade braking downshifts are automatically commanded when:
  • positive vehicle acceleration is sensed (natural acceleration from grade descent).
  • a near zero APP is obtained.
  • a minimum amount of time has expired since the last grade braking downshift.
• Grade braking downshift mode is immediately exited should the tow/haul mode be deactivated or if the accelerator pedal is pressed beyond a minimum threshold.