LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (Rear Drive Axle/Differential) >> Removal And Installation >> Stub Shaft Seal >> Installation

Stub Shaft Seal: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Lubricate the new stub shaft seal with grease.

    Using the Front Axle Oil Seal Installer 205-350 T95T-3010-A and Handle 205-153 T80T-4000-W, install the new stub shaft seal.

    Fig 1: Installing Stub Shaft Seal Using Front Axle Oil Seal Installer
    G06065012Courtesy of FORD MOTOR CO.
  2. Install the halfshaft assembly. REFER to HALFSHAFT .
scientia non olet · About LEMON Manuals