LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (Rear Drive Axle/Differential) >> Removal And Installation >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING .
  2. If equipped, remove the exhaust insulator located near the differential housing cover using soapy water.
  3. NOTE: Drain the rear axle lubricant into a suitable drain pan.

    Remove the 10 differential housing cover bolts and the differential housing cover.

scientia non olet · About LEMON Manuals