Power Point: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Open the power point cover.
Install 501-039 in one of the power point socket slots.

Fig 1: Installing 501-039 In One Of Power Point Socket Slots
Courtesy of FORD MOTOR CO.
Position 501-039 so that it engages in the adjacent slot.

Fig 2: Positioning 501-039 To Engages Both Power Point Socket Slots
Courtesy of FORD MOTOR CO.
Using 501-039, pull the power point socket out of the retainer.

Fig 3: Pulling Power Point Socket Out Of Retainer Using 501-039
Courtesy of FORD MOTOR CO.
Disconnect the electrical connector.