LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 257 (Instrument Panel And Console) >> Removal And Installation >> Instrument Cluster Finish Panel >> Removal

Instrument Cluster Finish Panel: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the steering wheel to the full downward position and outward position.
    G07431039
  2. Unclip the gap hider from the upper steering column shroud.
    G07431040
  3. Release the 4 clips and remove the IPC  finish panel.
    1. Disconnect the electrical connector.
      G07431041
scientia non olet · About LEMON Manuals