LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 256 (Anti-Theft System - Passive Anti-Theft System (Pats), With Intelligent Access) >> Removal And Installation >> Passive Start Antenna - Front >> Removal

Passive Start Antenna - Front: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the selector lever. REFER to SELECTOR LEVER .
  2. Remove the 2 front passive start antenna nuts.
    1. To install, tighten to 5 Nm (44 lb-in).
  3. Disconnect the front passive start antenna electrical connector and remove the front passive start antenna.
scientia non olet · About LEMON Manuals