LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 255 (Electronic Engine Controls) >> Removal And Installation >> Variable Camshaft Timing (VCT) Oil Control Solenoid - 3.5L GTDI >> Removal

Variable Camshaft Timing (VCT) Oil Control Solenoid - 3.5L GTDI: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

RH VCT oil control solenoid 

  1. Remove the RH valve cover. REFER to VALVE COVER -- RH .

    LH VCT oil control solenoid 

  2. Remove the LH valve cover. REFER to VALVE COVER -- LH .

    Both VCT oil control solenoids 

    • To install, tighten to 10 Nm (89 lb-in).
      G09087641