LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 253 (MULTIFUNCTION Electronic Modules) >> Diagnosis And Testing >> Multifunction Electronic Modules >> Pinpoint Tests >> Pinpoint Test K: U0100:00 >> Diagnostic Overview

Diagnostic Overview

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

U0100:00 

FAULT CONDITION DESCRIPTION

DTC Description Fault Trigger Conditions
U0100:00 Lost Communication With ECM/PCM "A": No: Sub-Type Information Sets in continuous memory in the BCM  if data messages received (vehicle speed) from the PCM  over the HS-CAN  are missing for 5 seconds or more.
scientia non olet · About LEMON Manuals