LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Steering Column Switches) >> Removal And Installation >> Steering Wheel Switch >> Installation

Steering Wheel Switch: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install steering wheel switch making sure all 3 tabs are seated in the retainers.
  2. Connect the electrical connector.
  3. Position the steering wheel trim cover and install the 3 screws.
    Fig 1: Locating Steering Wheel Trim Cover Mounting Screws
    G07402174Courtesy of FORD MOTOR CO.
  4. Install the steering wheel. REFER to STEERING WHEEL .
scientia non olet · About LEMON Manuals