Multifunction Switch

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

The multifunction switch is a multiple position switch controlled by a lever. The multifunction switch controls the turn signal, headlamp low/high beam and headlamp dimmer/flash-to-pass functions. On vehicles with the police package, the multifunction switch also controls the front and rear wipers and washers.

For the turn signals, REFER to TURN SIGNAL AND HAZARD LAMPS , Turn Signals.

For the headlamp low beams, REFER to HEADLAMPS , Low Beams.

For the headlamp high beams, REFER to HEADLAMPS , High Beams.

For the headlamp dimmer/flash-to-pass functions, REFER to HEADLAMPS , Flash-To-Pass.

For the front wiper and washer functions, REFER to WIPERS AND WASHERS - FRONT .

For the rear wiper and washer functions, REFER to WIPERS AND WASHERS - REAR .