Network Message Chart
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
BCM NETWORK MESSAGE CHART
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Headlamp switch status | FLM | Indicates the headlamp switch position to the BCM . When the BCM has turned the parking lamps on based on input from the FLM , voltage is also provided to the trailer tow parking lamp relay. |
| Turn signal switch_status | SCCM | Indicates the turn signal stalk position on the multifunction switch (left/right lane change or turn signal on or off) to the BCM . The BCM activates the left/right trailer tow stop/turn relays based on this input. |
| Selector lever (PRNDL) status | PCM | Indicates to the gear selector lever position to the BCM . When the selector lever is in REVERSE and the ignition in RUN, the BCM provides voltage to the trailer tow reversing lamp relay. |