Ride Height Measurement - Rear
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
-
NOTE: Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. The vehicle should have a full tank of fuel.
Measure the distance between the flat level surface and the center of the lower control arm-to-subframe bolt (measurement 2).
- Measure the distance between the same flat level surface and the center of the lower arm-to-knuckle bolt (measurement 3).
- Subtract measurement 3 from measurement 2 to obtain the rear ride height.
- Refer to GENERAL SPECIFICATIONS .