LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Mechanical - 6.7L Diesel) >> In-Vehicle Repair >> Valve Tappets >> Installation

Valve Tappets: Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: To prevent engine damage, keep the valve tappets in the order in which they were removed. Install all valve tappets back in their original positions.
    NOTE: Always keep the valve tappets in the upright position or the hydraulic lash adjuster may fall out.
    NOTE: Apply clean engine oil to the valve tappet bores prior to installing the valve tappets.

    Apply clean engine oil to the valve tappets and install the valve tappets.

  2. Install the valve tappet guides.
  3. Install the RH cylinder head or LH cylinder head. For additional information, refer to CYLINDER HEAD .
scientia non olet · About LEMON Manuals