LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Mechanical - 6.7L Diesel) >> General Procedures >> Hydraulic Lash Adjuster Inspection

Hydraulic Lash Adjuster Inspection

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the hydraulic lash adjuster for damage. Inspect the hydraulic lash adjuster for a distorted or loose cap. Install a new hydraulic lash adjuster as necessary.
    • If any damage is found, inspect the valve tappet, push rod and rocker arm for damage.
      Fig 1: Identifying Hydraulic Lash Adjuster
      G08593094Courtesy of FORD MOTOR CO.