LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Mechanical - 6.7L Diesel) >> Disassembly And Assembly Of Subassemblies >> Piston >> Disassembly and Assembly

Disassembly and Assembly

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Mark the connecting rod and piston to make sure correct orientation on reassembly.

    Remove the 2 piston pin retainers.

  2. NOTE: The piston pins are a floating type piston pin and should not require a press to remove or install them.

    Remove the connecting rod.

    • Remove the piston pin.
    • Remove the connecting rod.
  3. To assemble, reverse the disassembly procedure.
    • Lubricate the connecting rod piston pin bore, piston pin bore and piston pin with clean engine oil prior to assembly.
scientia non olet · About LEMON Manuals