LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Climate Control System - DATC) >> General Procedures >> Air Conditioning (A/C) Clutch Air Gap Adjustment >> General Procedure

General Procedure

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the A/C clutch air gap at 3 equally spaced places between the clutch plate and the A/C clutch pulley.
    Fig 1: Checking Air Conditioning Clutch Air Gap Adjustment Using Tool
    G07428413Courtesy of FORD MOTOR CO.
  2. Remove the clutch plate. Add or remove spacers between the clutch plate hub and the compressor shaft until the clearance is within specification.
scientia non olet · About LEMON Manuals