LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (Engine System - General Information) >> General Procedures >> Valve Stem Diameter >> General Procedure

General Procedure

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to General Specifications in the appropriate engine service information for the specification.
  1. Measure the diameter of each intake and exhaust valve stem at the points shown in illustration. Verify the diameter is within specification.
    G06064097
scientia non olet · About LEMON Manuals