Inspection and Verification
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the customer concern.
- Visually inspect for obvious signs of mechanical damage.
- U-joints
- CV joints and boots
- Center bearings
- Driveshaft tubes
- Mounting brackets
- Flanges
- Housing and cover damage
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
- If the cause is not visually evident, verify the symptom and refer to SYMPTOM CHART: NVH .