LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Mechanical - 6.8L) >> In-Vehicle Repair >> Engine Oil Pressure (EOP) Switch >> Installation

Engine Oil Pressure (EOP) Switch: Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty and 2013 Ford F-450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the EOP switch and tighten in 2 stages.
    • Stage 1: Tighten to 14 Nm (125 lb-in).
    • Stage 2: Tighten an additional 180 degrees.
  2. Connect the EOP switch electrical connector.
scientia non olet · About LEMON Manuals