Crankshaft Rear Seal: Removal

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty and 2013 Ford F-450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Remove the flexplate. For additional information, refer to FLEXPLATE .
Remove the engine rear cover plate.
Using the Slide Hammer and the Crankshaft Rear Oil Slinger Remover, remove and discard the crankshaft oil slinger.

Fig 1: Removing Crankshaft Oil Slinger Using Slide Hammer And Crankshaft Rear Oil Slinger Remover
Courtesy of FORD MOTOR CO.
Using the Slide Hammer and the Crankshaft Rear Oil Seal Remover, remove and discard the crankshaft rear seal.

Fig 2: Removing Crankshaft Rear Seal Using Slide Hammer And Crankshaft Rear Oil Seal Remover
Courtesy of FORD MOTOR CO.