Crankshaft Rear Seal: Installation

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty and 2013 Ford F-450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Lubricate the crankshaft rear seal with clean engine oil prior to installation.

Using the Crankshaft Rear Oil Seal Installers, install a new crankshaft rear seal.

Fig 1: Installing Crankshaft Rear Seal Using Crankshaft Rear Oil Seal Installers
Courtesy of FORD MOTOR CO.
NOTE: Lubricate the crankshaft oil slinger with clean engine oil prior to installation.

Using the Crankshaft Rear Oil Seal Installers and the Crankshaft Rear Oil Slinger Installer, install a new crankshaft oil slinger.

Fig 2: Installing Crankshaft Oil Slinger Using Crankshaft Rear Oil Seal And Slinger Installer
Courtesy of FORD MOTOR CO.
Install the engine rear cover plate.
Install the flexplate. For additional information, refer to FLEXPLATE .