Main Control Valve Body: Removal
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING AND LIFTING .
- Remove the main control cover. For 3.5L GTDI refer to, MAIN CONTROL COVER - 3.5L GTDI . For 3.5L Ti-VCT refer to, MAIN CONTROL COVER - 3.5L TI-VCT . For 3.7L Ti-VCT refer to, MAIN CONTROL COVER - 3.7L TI-VCT .
- Slide the TR
sensor electrical connector lock tab over.
-
NOTE: Handle the solenoid body with care or damage to the solenoid body may occur.