|
|
- Solenoid body filter blocked to the TCC
solenoid
|
|
- TCC
solenoid mechanically stuck OFF
|
|
- TCC
regulator apply valve stuck OFF
|
- DISASSEMBLE, CLEAN and INSPECT the TCC
regulator apply valve. If bore or valve is damaged, INSTALL a new main control. REFER to MAIN CONTROL - OVERHAUL .
|
- TCC
control valve stuck OFF
|
- DISASSEMBLE and INSPECT the TCC
control valve for debris/blockage. CLEAN as necessary. REFER to MAIN CONTROL - OVERHAUL .
|
- TCC APPLY hydraulic circuit blocked or leaking
|
|
- TCC
friction material worn or damaged
|
|
- TCC
always applied/stalls vehicle
|
- TCC
solenoid mechanically stuck ON
|
|
- TCC
regulator apply valve stuck ON
|
- DISASSEMBLE, CLEAN and INSPECT the TCC
regulator apply valve. If bore or valve is damaged, INSTALL a new main control. REFER to MAIN CONTROL - OVERHAUL .
|
- TCC
control valve stuck ON
|
- DISASSEMBLE, CLEAN and INSPECT the TCC
control valve. If bore or valve is damaged, INSTALL a new main control. REFER to MAIN CONTROL - OVERHAUL .
|
- TCC RELEASE hydraulic circuit blocked or leaking
|
|
|
|
|
- TCC
cycles, shudders or chatters
|
- Incorrect Solenoid Body Strategy programmed into TCM
|
|
- Solenoid filter or seal damaged at TCC
solenoid
|
|
- TCC
solenoid mechanically sticking
|
|
- TCC
regulator apply valve, springs, clips - loose, stuck, binding, missing, misassembled
|
- DISASSEMBLE, CLEAN and INSPECT the TCC
regulator apply valve. If bore or valve is damaged, INSTALL a new main control. REFER to MAIN CONTROL - OVERHAUL .
|
- TCC
control valve, springs, clips - loose, stuck, binding, missing, misassembled
|
- DISASSEMBLE and INSPECT the main control for debris/blockage. CLEAN as necessary. REFER to MAIN CONTROL - OVERHAUL .
|
- TCC
RELEASE/TCC
APPLY hydraulic circuits blocked or leaking
|
|