LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Automatic Transmission - 6F35) >> Disassembly And Assembly Of Subassemblies >> Differential Gear Assembly >> Assembly

Differential Gear Assembly: Assembly

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for damage or excessive wear. Visual check.
    G08412241Courtesy of FORD MOTOR CO.
  2. Check for damage or excessive wear. Visual check.
    G08412242Courtesy of FORD MOTOR CO.
  3. Check that bearings spin freely and do not move back and forth or side to side excessively. Check for damage or excessive wear. Visual check.
    G08412243Courtesy of FORD MOTOR CO.
  4. NOTE: Do not mix up the washers from the side or spider gears that they were originally assembled with. Assembly of the differential with the wrong washers can cause excessive wear to the differential carrier, spider or side gears.
    G08412244Courtesy of FORD MOTOR CO.
  5. G08412245Courtesy of FORD MOTOR CO.
  6. G08412246Courtesy of FORD MOTOR CO.
  7. Align the roll pin holes. Visual check.
    G09088392Courtesy of FORD MOTOR CO.
  8. New roll pin. Pin punch.
    G08412248Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals