LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Limited, 3.5 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Engine Mechanical -3.5L Ti-VCT) >> Removal And Installation >> Engine Mount >> Installation

Engine Mount: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the engine mount onto the engine studs and install the 4 nuts and 3 bolts hand tight.
    • Tighten the 3 engine mount-to-frame bolts to 90 Nm (66 lb-ft).
    • Tighten the 4 engine mount-to-engine nuts to 63 Nm (46 lb-ft).
      G08029547
  2. Install the 3 twist-type retainers and the air duct to the subframe.
    G07430766
  3. Install degas bottle. REFER to DEGAS BOTTLE .
scientia non olet · About LEMON Manuals