Valve Springs: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Check the seating of the valve collet.

Install the valve spring and the valve spring retainer.
- Using 303-300 T87C-6565-A, 303-350 T89P-6565-A, 303-472 T94P-6565-AH and 303-1249 compress the valve spring and install the valve collet using some grease and a small screwdriver.
Disconnect the compressed air supply.
Repeat the appropriate removal and installation steps for all of the other cylinders.
Install the spark plugs. REFER to SPARK PLUGS .
Install the valve tappets. Refer to VALVE TAPPETS .