Disassembly And Assembly Of Subassemblies: Piston: Assembly
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Align the piston-to-connecting rod orientation marks and position the piston on the connecting rod.
-
NOTE: Lubricate the piston pin and pin bore with clean engine oil.
Install the piston pin in the piston and connecting rod assembly.
- Install the 2 new piston pin retainers in the piston.
-
NOTE: Lubricate the piston and the new piston rings with clean engine oil.
Install the piston rings on the piston.
- Align the piston rings on the piston.